Make sure the new bulb does NOT say " Made in China" ... GE is the best.
>Thanks Jim,
> I filed the contacts on the bottom down and it still won't go
>in. I filed them down pretty far too. Still won't go in.
>
> -Bill
>
>--- On Wed, 12/1/10, Jim <cartr4a@ameritech.net> wrote:
>
>From: Jim <cartr4a@ameritech.net>
>Subject: Re: [TR] 1157 Turn Signal Bulbs
>To: "William Brewer" <wsb1960tr3a@att.net>, "triumph list"
><triumphs@autox.team.net>
>Date: Wednesday, December 1, 2010, 9:32 PM
>
>Is it close to twisting in? I found that a few times I've had to
>file the bottom contacts down a little so the bulb goes in deeper.
>
>Jim
--
"Thinking is the hardest work there is. That's why so few people
undertake it." - Henry Ford
Bill Pugh
1957 TR3
"Casper"
TS16765L
Wallace, CA
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|