Ran into a glitch. The inlet manifold I used is missing the 'tab' that the
carb linkage connects to.
My engine calls for #305547; description: MANIFOLD, inlet, high port with boss
on balance tube TR3 from TS13053, TR3A
The one on the engine is #302119; description: MANIFOLD, inlet, high port TR3
from TS9350 to TS13052E
I have access to a #119 - are they interchangeable other than the balance tube?
I also have a #305744: MANIFOLD, inlet, long curved tubes no tapping with TR4
to CT21470; if anyone is interested. Note that the carb linkage piece is bent
- not on the manifold but the attachment. would need to be cleaned up....
Thanks
Carl
TS81802LO - home from the painter and now the 'bits' go back on....
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|