Thank you Randall - as always you are a fountain of knowledge....
Carl
----- Original Message -----
From: "Randall" <tr3driver@ca.rr.com>
To: <triumphs@autox.team.net>
Sent: Wednesday, September 29, 2010 8:05 PM
Subject: Re: [TR] TR3 Dash Bracket Question
>> Installing dash (facia) on the '3, specifically the two brackets that
>> connect it to the battery box. One has a a U-shaped cut-out on one
>> end. I
>> cannot remember if there is a purpose for that cut-out.
>
> It was, at least at one time, supposed to line up with the trip meter
> reset.
>
> I've posted a copy of the factory service note showing that, on Google
> Docs:
> http://tinyurl.com/27938r9
> (But you will probably need a Google Docs account to access it.)
>
> -- Randall
>
> _______________________________________________
> Triumphs@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $11.47
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe:
> http://autox.team.net/mailman/options/triumphs/cfmtr3a@verizon.net
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|