>1. Is the Pertronix unit receiving full voltage? I had one on a TR-6 that
>failed because it was wired to the regular coil feed wire - the one after
>the ballast resister wire. The unit was receiving only 8-9 volts. It would
>produce a spark at craning speed, but that was it. The supply voltage should
>have come directly from a switched 12v source like the fusebox.
Thanks, Alex. I'll be taking my voltmeter back with me this morning and will
check.
Terry
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|