Had the bracket mounted on the heater wrong, all is well, can sleep tonight...
(had only looked at the picture 20 times)...ugh, happens...Sorry
Dave Willner, PA
59 TR3A
70 MGB
70 BSA 441 Victor Special
2009 Mustang GT Supercharged
----- Original Message -----
From: davewillner
To: triumphs@autox.team.net
Sent: Monday, September 20, 2010 7:12 PM
Subject: TR3A heater reinstall question...no feet.
When reinstalling the heater, does the bracket get attached first to the
firewall and two lower supports without the heater attached or does it have to
be attached to the brackets first. With new heater hoses in place its just a
bit tight to get that stud up thru the firewall. Kinda struggling, any help
and logical steps, other than read the Haynes "reassembly is the reverse of
disassembly process," would be appreciated. Thanks
Dave Willner, PA
59 TR3A
70 MGB
70 BSA 441 Victor Special
2009 Mustang GT Supercharged
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|