[Does anyone know where the vent tray drain tube should drain too? I have
seen pictures with both tubes (battery box and vent tray) going into a "Y"
connector just sticking above the trans tunnel draining into one tube that
runs along the housing, is that the deal?]
Dave,
I just went thought this stage last year. Have never seen a "Y" with the
battery box drain as these are vastly different size hoses. Everything I
found was a routing that took the hose out through what would be the RHS (or
LHS) steering column hole. There is a plate and a triangular rubber
blanking plate piece that is made for this purpose, TRF #603346 is the
rubber, the hold-down plate is NLA but could be easily fabricated from a
template.
Hope this helps,
Bill
Bill Beecher
'58 TR-3A TS30766L "Tarbaby"
www.triumphowners.com/1566
"A Triumph is man's best friend, it always comes when it is called...of
course, some times it is difficult to make it go"
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|