I did PC the housing - masking off the areas Dave mentioned. Powder coating
is much 'smoother' than regular finishes. I had a hard time getting the top
radiator hose to grip. I ended up sanding it down a bit before installing
the hose. It would be much easier to do that with it off the car than on
it. as an option you could mask off 1" or so of that outlet.
C
----- Original Message -----
From: <Dave1massey@cs.com>
snip
>
> You can do the pump housing, there's noting there to harm. Be sure to
> mask
> off the block attachment and pump mounting mating surfaces.
>
> I wouldn't even consider the pump for reasons outlined by Randall.
>
> Dave
>
> _______________________________________________
> Triumphs@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $11.47
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe:
> http://autox.team.net/mailman/options/triumphs/cfmtr3a@verizon.net
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|