When I removed the timing cover oil seal the last time, the engine was out of
the car and the cover off the engine.
This time, radiator removed, apron removed, all that, what's the easiest way to
get the seal out without damaging the cover. Apply a tiny bit of heat, maybe
tap on one side with a brass punch? ...Or insert a small allen wrench and tug
forward using vise grips?
Thank you, everyone.
Terry Smith, '59 TR3A
New Hampshire
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|