On Monday, July 05, 2010 09:20:55 am Carl TR wrote:
> Does anyone know of a source for replacement vacuum line
>
> Late TR3A
> screw type connections
>
> at the distributor: 8mm w/1mm thread nut
> at carburettors: 7mm w/1mm female end
>
> I have the 7mm fitting that was in the carb housing but might as well
> replace both if I can find them.
>
> What diameter is the tubing. it appears to be about 1/8 od but since the
> fittings are metric - it might be a metric size tube.
>
> Also - what length. I figured at max a length equivalent to the fuel line
> from near the distributor to the connection at the carb.
>
> Thanks
> C
>
Carl,
I bought one from Moss for my 4 a few years back. It is the same as on the 3
but the tube is copper and the fittings are brass. Fit was perfect and looks
nice polished up with Brasso.
http://www.mossmotors.com/Shop/ViewProducts.aspx?PlateIndexID=29171#top
Part # 23 on the page: 371-960
Bob
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|