Mark, the last time I did this it was exactly as you describe. You soak the
transfers in water for a few mins, make sure the surface of the escutcheons
are clean and free of contaminants and then just slide each transfer into
position and gently position it and smooth it out if needed. Once it dries it
is there for a long time.
Stan
-----Original Message-----
From: triumphs-bounces@autox.team.net [mailto:triumphs-bounces@autox.team.net]
On Behalf Of Mark Hooper
Sent: Friday, July 02, 2010 9:49 PM
To: triumphs@autox.team.net
Subject: [TR] Decal instructions?
Hi all:
A few years back I bought the decals for the turn signals and headlight (Dim,
flicker, off) switch on the TR6. that go on the plinths (covers really) of the
steering column. Finally getting to putting the things on.
Do these things go on some special way? They don't appear to be peel off and
stick, so I assume they were the type you soak in a bowl of water for a
while.
Has anybody done these recently?
Mark
1972 TR6
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|