In a message dated 7/2/2010 11:05:20 AM Central Daylight Time,
ahwahneetr@gmail.com writes:
> The drive thingy (if you mean what Moss call 'sleeve assembly p/n
> 549-580) is available (there may even be an improved design out
> there).
>
> http://www.mossmotors.com/Shop/SearchResults.aspx?SearchText=549-580%20&;
> WebCatalogID=0
>
> In any case, you can fake that, leastways I did. Back when these were
> NLA I repaired mine by jamming the thing with strips of tire tube
> rubber, then pressing it together. Got a replacement when someone
> (Steve Hedke?) finally developed one but have never bothered to pull
> the starter and install it as the inner tube fix still works after 20+
> years.
>
Interesting. But not something one would do if one were to offer a
warranty. Perhaps some two part polyurethane might work better.
Dave
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|