I have a 90 degree spin on filter adapter on my 2.5L GT6 Convertible. I
had to do a bit of searching to get the smallest filter can length that
would thread on. My filter is clocked so that when viewing the LH side of
the engine so that the filter can base points to about 7 o'clock for
filter to frame clearance (to be able to install / remove the filter). My
filter adapter was driven as part of an oil cooler installation.
> I am going to replace my canister filter with an adapter. It was bought
> from Rimmer and, even though their printed catalogue shows a straight on
> adapter, what was sent was a 90 degree adapter. Has anyone installed one
> of
> these on their GT6? Mine is a '72 model. Any tips/trials/tribulations?
> What angle should the filter be upon installation?
> Thanks for all your help
>
> Sam Clark
> Green Country Triumphs (Tulsa, Ok)
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|