triumphs
[Top] [All Lists]

Re: [TR] '3a Alternator conversion...

To: Triumph List <triumphs@autox.team.net>
Subject: Re: [TR] '3a Alternator conversion...
From: Randy&Val DeRuiter <deruiterville@hotmail.com>
Date: Fri, 18 Jun 2010 08:16:49 -0500
> - 1 denso alternator ( part number coming )
> - 1 wide belt pulley
> - 1 bracket adaption "thingy", yet to be designed for this project
> - 1 pigtail connector for the alternator
>
>


The wide pulley that I've seen available for purchase is meant for the Delco
alternator, I believe the shaft diameter on the Denso is different, actually I
think very close the the original generator diameter.  A stock pulley cannot
be used, however, without some machine shop work.



I also think the Denso will be wired up slightly differently than the Delco,
at least the Denso I purchased.  It needs a switched power source to energize
which I will be adding.  I found a suitable pigtail on ebay for the Denso.



Randy

_________________________________________________________________
The New Busy think 9 to 5 is a cute idea. Combine multiple calendars with
Hotmail.
http://www.windowslive.com/campaign/thenewbusy?tile=multicalendar&ocid=PID283
26::T:WLMTAGL:ON:WL:en-US:WM_HMP:042010_5

_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>