Sounds like the setup for a TR4A; mine is this way.
January Williams
66 TR4A CTC74217 LO Salem. Oregon
----------------------------------------------------------------------------
Date: Tue, 8 Jun 2010 13:12:05 -0400
From: Chris Simo <ccsimonsen@gmail.com>
Subject: Re: [TR] TR4 tonneau
My 63 TR4 has lift a dot around the rear coping and snaps at the dash and
doors. The dash snaps are a little odd - the snaps are attached to sheet
metal strips that are attached via the 3 chrome bolts at the base of the
windscreen. The center one is smart - it has snaps at either side of the
bolt - the left and right sides are not a good design - snap at end of
metal strip - encourages rotation of snap.
Does anyone else have this setup?
Chris
63 TR4 (originally imported to germany and has locking steering column)
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|