Hi,
I posted a couple of weeks ago about the wiring to my TR6 solenoid that had
suffered while in storage.
I have had a look at the wiring schematic and at the solenoid on my car. On
the solenoid I can see the main feed from the battery(thick cable) and then 2
spade terminals. One spade terminal appears to be the feed from the ignition
switch and I have reconnected that one. Not sure what should be on the other
spade connector as there is nothing on it at the moment.
Any ideas???
What do I need connected to the solenoid as a minimum to get it to turn over
on the key? At the moment when I turn the key nothing happens.
Thanks
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|