Re: [TR] TR4 Speedo with OD

["Ed Woods" <fogbro1@comcast.net>]

List,

I have found that the dozen right angle drive I have on hand have two 
distinct input "shaft" dimensions: .102 and .119, give or take.

The .102 will not work with the later TR speedo drives, the aluminum ones, 
and only sporatically with the early TR brass speedo drives.

FWIW,

Ed Woods 

_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums