I have a plexiglass rear window for my 59 TR3A hard top. When I got it, it
was badly scratched to the point where you could hardly see through it.
I was just finishing the restoration of the car and had just completed
buffing out the clear coat paint finish. In doing this I had purchased a 3"
buffing gun from a local auto paint supply store to get into tight spots on
the bonnet around the headlights and other tight areas.. I used this small
buffer with Novus #3 Heavy Scratch remover and it made it almost new
looking. Excellent product and available at most of the usual culprits.
You may also want to try the same process with the new headlight lens
polish. It worked wonders on my Jeep headlight covers.
Alex
59 TR3A
72 TR6
----- Original Message -----
From: <jimmuller@rcn.com>
To: <triumphs@autox.team.net>
Sent: Friday, May 14, 2010 2:01 PM
Subject: Re: [TR] Cleaning Plexiglas WindWings
> Bill wrote:
>> have a pair of Amco Plexiglas windwings on my TR3 that,
>> other than them being a little foggy and some minor
>> scratches
>
> Don't know about a buffing wheel. My wife had an iPod knockoff with video
> screen which she let get so scratched she could read the song titles. So
> I went to Radio Shack and bought a liuttle kit of special cloth an and
> polishing fluif for buffing out scratched CD's. In not much more than
> half an hour it became quite useable again. That fluif might work great
> for buffing plexiglass.
> --
> Your tunes may vary, of course.
> Jim Muller
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|