I think you're right. Looking at my old panels the third hole is "up and
forward". As usual, thanks for the help.
Tom
----- Original Message -----
From: "Randall" <tr3driver@ca.rr.com>
To: <tfansher@comcast.net>
Sent: Friday, May 07, 2010 2:16 PM
Subject: RE: [TR] TR3A hood stick bracket placement
>I can't check, as they aren't mounted on either of my TR3s at the moment.
> But I'm pretty sure the third hole goes up. A quick measurement should
> tell
> you : measure the length of the link and check whether there is room for
> it
> between the hole and the inner fender. It has to pass through when
> raising/lowering the sticks, and I don't believe it will if you install
> the
> brackets upside down.
>
> -- Randall
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|