Randall and List
Subject: Re: [TR] Bosch Alternator on the TR250
>> 3. The pulley width is most suitable for a 1/2" belt as used
>> on later TR6s.
>
> The ones I've bought have come without pulleys. For a friend's TR6, his
> original pulley went on perfectly; I haven't completed the conversion on a
> Stag yet.
I figured the Bosch shaft was a metric size. Never tried to fit the original
TR250 pulley. This was the night before departure!
>
>> 4. I never did find a proper single connector, with or
>> without a pigtail,
Moss has a kit which TRF also had. Got one from TRF the day before. Looked
like more work than to simply fit individual connectors. So, time being and
issue, I went with individual connectors.
>
> Does Moss no longer carry them ?
See above
>
>> The 3/8" female connector is the hardest to find.
>
> Where did you find them? Later TR3A through TR4A also use this connector
> and I've only got a few of them left.
In a rare moment, I remembered that I had a number of Lucas connectors of
the proper size. Probably from use on a later TR3 generator way back in the
very dim past. I believe British Wiring still has them.
>
>> so I'm glad I did the conversion.
But then, a rebuilt Lucas unit would have worked well too. There is/was no
additional electrical load on this car, just original equipment. The Lucas
rebuilt I got from AutoZone last year for an MGB was 40 dollars cheaper than
the Bosch and also with a "lifetime" guarantee!
>
> Good!
It was a great trip. Left the TR250 with its owner in Jacksonville, FL which
has freed up one garage space.
Ed
>
> Randall
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|