> Of course I am back to a previous problem now with quite a flow of oil
> streaming down between the engine and box, me thinks crank
> seal, it does not
> appear to be the sump and is definitely not the head, engine
> out?????.
Not likely to be the seal, unless you forgot to install it or some such. If
you are sure it's not the hex-head plug in the back corner of the head, I
would suspect the plug in the end of the oil galley, or perhaps the one in
the camshaft bore. Unfortunately the remedy is the same.
> I also
> noticed while running some oil coming out around one of the
> front head studs, any thoughts???
Most likely some left over oil that got trapped in the bore for the stud.
If so, it will stop soon. Otherwise I think it has to be a leak from the
rocker cover or similar, as there is no place for oil to leak into the stud
area.
Randall
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|