A TR3 transmission is non-syncro first gear and most likely the TR3B that
you are referring to is the fully synco'd transmission. That would make the
cluster gears different and likely the bearings not interchangeable.
JVV
----- Original Message -----
From: "Al Salvatore" <tr6parts@charter.net>
To: <triumphs@autox.team.net>
Sent: Saturday, April 03, 2010 10:43 PM
Subject: [TR] tr3 transmission
> My friend is rebuilding a tr3 transmission.
>
> The trans has open needle bearings. Can the TR3b later caged bearings be
> subsituted?
>
> Thanks,
>
> Al
>
> _______________________________________________
> Triumphs@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $11.47
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe:
> http://autox.team.net/mailman/options/triumphs/jerryvv@roadrunner.com
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|