I decided it just couldn't be right. When I looked at the vertical
alignment of the belt it was 'out' about 3/8". After much verbal abuse, I
was able to pull the fan hub and found that it wasn't. The key on the
crankshaft had come out and was wedged behind fan hub.
All is good now - and on to the next step this weekend.
Carl
----- Original Message -----
From: "Carl TR" <cfmtr3a@verizon.net>
To: "triumph list" <triumphs@autox.team.net>
Sent: Monday, March 29, 2010 7:54 PM
Subject: [TR] TR3 fan hub measurement
> Good evening all.
>
> I mounted the fan hub, pulley, extension yesterday. The pulley is
> extremely close to the center tie rod. Could someone please measure the
> distance from the timing cover to the back of the fan hub?
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|