> looking for the p/n 503678 plate, clamp distributor the one
> I have is pretty
> beat up and the clamp doesn't hold the distributor in place.
Check your distributor body carefully. There is a lip that the plate is
supposed to grab, and that lip is frequently broken (due to overtightening).
If the lip is broken, the clamp isn't going to work.
> Also, it is fairly 'soft' so it may be that I can just
> straighten and replace the bolt/nyloc.
Should be a plain square nut, not a nyloc.
> Also, the clamp has residue of a gasket on it, but none of
> the manuals
No gasket needed here.
-- Randall
_______________________________________________
Triumphs@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|