> Thanks for any help anyone can provide.
If you use the new harness from TRF, I would definitely recommend using wire
pulling lubricant when installing it through the stator tube. I found this
kind at Home Depot, which seemed to work well for me, but likely any brand
would work about as well.
http://www.mytoolstore.com/klein/51010.html
I've heard that other vendors offer a skinnier harness that pulls easier,
but the lube still wouldn't hurt, IMO. Even the factory harness is pretty
darn snug, especially if the tube is kind of grungy inside.
-- Randall
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation $11.47
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|