> Does anyone know of a supplier of aeroscreens that will fit the
> pre-drilled/threaded holes, so I don't have to drill new holes?
>
> Thanks! Tim
>
Tim-
You might try Tom Maddock over in the UK - he has made replica feet that will
allow the newer aeroscreens to fit in the existing factory holes. Here is a
note he put out on the TR Register site:
I shall be at Malvern on the saturday and will bring conversion sets (as
featured in Traction)for anybody
that wants them.
Mounting feet with the sealing rubbers are #32.00 a pair and the correct
shaped glass is #16.00
email me at UKZ3Man@Yahoo.com.
Regards,
Randy
_________________________________________________________________
Hotmail: Trusted email with Microsofts powerful SPAM protection.
http://clk.atdmt.com/GBL/go/177141664/direct/01/
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|