my question - they've painted the tub, and I'm wondering if the inner
fenders etc are supposed to be buffed (glossy) or not.
If you are talking about the inner fenders in the engine compartment the
answer is yes. The underside of the bonnet as well as the firewall should
be wet sanded with at least 600 grit. While you are at it the inner fenders
in the boot and the underside of the boot lid should be included. You
will never have a better time to do it right!
I volunteered to do that exact thing when my TR2 was going through the
process. I felt I could do the wet sanding better and cheaper than the shop
flunky at the standard $60 per hour.
Lou Metelko
TR2LD
Auburn, Indiana
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|