Mark Macy at Mac y's Garage
http://www.macysgarage.com/
has a thin padding kit that he sells just for this purpose.
Tom
On 12/14/09, William Brewer <wsb1960tr3a@att.net> wrote:
> It looks like getting the beading part part down flat without wrinkles
> is the tough part.
As I recall, I used a layer of thin foam (maybe 1/8" thick and not
dense, could practically see thru it) to create just enough padding
that the seam/beading sat well. Another owner told me he sued an old
baby blanket in a similar fashion.
Geo
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|