Folks,
I'm in the process of painting a rusty frame, sorry not an LBC, but close...
POR15 is a contender, but I'm also open to alternatives that can be sprayed
with a HPLV spray gun. What is the current view on frame preparation and
painting? This is a vehicle that's in use, so sandblasting or dipping
isn't feasible.
The best I can do is sand, wire brush, and degrease. In short, not all
the rust
will be removed. I need a primer/paint system that can be applied over a
shiny
steel bust rust-pitted surface?
Thanks,
David Brady
'68 TR250,
CD8124L
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|