11/19/09
Carl
Here are measurements from TS6927L:
Hood: Front @ latch=46-1/8"
Rear @ Cowl=47-1/4
Front height @ Center line* = 3"
Rear height @ Center Line* = 8-1/2"
Trunk: Front @ key=44-1/8"
Rear @ filler=47-1/8
Front height @ (key) Center line* = 3-1/8
Rear height @ (filler) Center line* = 4"
* denotes panel sitting on a level floor and measurements taken on a front to
back lateral line
Hope this is what you were looking for.
Regards,
Dan Cronin
--- On Fri, 11/20/09, cfmtr3a@verizon.net <cfmtr3a@verizon.net> wrote:
From: cfmtr3a@verizon.net <cfmtr3a@verizon.net>
Subject: [TR] Fwd: Measurements - TR3
To: triumphs@autox.team.net
Date: Friday, November 20, 2009, 12:45 PM
My apologies - the Rich formatting was automatic and didn't realize it.
Thanks Randall.....
Nov 20, 2009 02:56:38 PM, cfmtr3a@verizon.net wrote:
Anyone have access to measure the hood and trunk lids for a TR3? (outside
dimensions at widest points). Also the 'height'.
I am at work and need the info this afternoon.
Thanks
Carl
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|