Sears sells what's called a Tap & Die Master Rethreader Kit
(http://tinyurl.com/yg22kya) Same idea as what you got in that it's only
used for cleaning up (not cutting) nut & bolt threads. I picked one up a few
years ago and use it every time I disassemble something.
Bob Danielson
1975 TR6 CF38503U
Running w/ Throttle Body Injection
Toyota 5 Speed & Nissan LSD
http://tr6.danielsonfamily.org
-----Original Message-----
From: triumphs-bounces@autox.team.net
[mailto:triumphs-bounces@autox.team.net] On Behalf Of Randall
Sent: Saturday, November 07, 2009 12:56 PM
To: triumphs@autox.team.net
Subject: [TR] Tool report : NF thread chasing set at MMC
Recently, I wanted to clean up some 9/16-18 threads on my TR3 front
suspension (upper ball joints to be precise); but the tap & die set I've
been using for many years only goes up to 1/2-20. Turns out a standard
9/16-18 die also takes a bigger handle than my set includes, so the die & a
handle started getting kind of expensive for just chasing one thread.
So, I tried this set instead:
http://www.mcmaster.com/#2667A12
So far, I have been very pleased with it; one of those things I wish I'd
bought years ago. The dies are the same size as standard nuts, so you can
turn them with the same socket or wrench, and they will fit anywhere that a
nut would. Much easier to use in close quarters (like the studs that hold
the shock to the spring pan). They also work much better on interrupted
threads (like the front spindles and the pins that hold the rear springs to
the frame), because they have 6 teeth instead of the standard 3.
They seem to form the threads more than cut them; the instructions note that
they cannot be used for cutting new threads (which is an advantage when you
are trying to clean up existing threads). However, they do take a little
more force to turn than a standard cutting die. The instructions also
recommend using cutting oil, which is a very good idea IMO.
MMC also offers the same set for coarse threads:
http://www.mcmaster.com/#2667A11
Randall
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|