triumphs
[Top] [All Lists]

[TR] TR4A Windshield Installation

To: triumphs@autox.team.net
Subject: [TR] TR4A Windshield Installation
From: Ben Zwissler <bjzwissler@gmail.com>
Date: Sun, 25 Oct 2009 14:41:47 -0400
     I'm about to install my windshield glass on my TR4A and I'm looking 
for advice on whether to use sealant and what type of sealant to use.  
There was sealant between the glass and seal on the old seal, but its 
not obvious that there was sealant between the seal and the frame.  
Also, when I asked my local auto body supply shop for sealant, the only 
thing they had was a urethane sealant in a caulking tube for "modern" 
windshields where no rubber seal is used.  Assuming sealant was used, 
what type of sealant have people had success with?

I'm tempted to just not use any since I won't be driving regularly in 
the rain anyway.  Of course, planning doesn't always stop the rain....

Thanks for any advice.

Ben......

-- 
Ben Zwissler
bjzwissler@gmail.com
Columbus, IN
1966 Triumph TR4A
1973 MG Midget
1980 Triumph TR8
2007 Mazda RX8
2002 Yamaha FZ1
2003 Honda ST1300
_______________________________________________

Support Team.Net  http://www.team.net/donate.html

This list supported in part by the Vintage Triumph Register
http://www.vtr.org


Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>