>I had an original shroud on my 72 TR6. B I would not advising dipping it. B I
wiped it with a damp rag, and in your case I would sand the
>rivets with fine sand paper, and then I sprayed the whole thing with black,
flat spray paint.
When I restored TR3A TS 58667, I bought a new cardboard radiator duct.B I did
spray it with 3 M rubberized wheel well paint to protect it, since List
experience indicated these deteriorate rapidly. It stillB deteriorated
rapidly.B
Ran the car this season without a duct with noB problem, but want to
re-install a duct.B Don't want to repeat the same experience, so am looing
for alternatives.B
Any suggestions out there?
Terry Smith
New Hampshire
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|