Hi List,
I've been following this list for years but this is my first submission. I
have an aluminum finned valve cove that I'd like to use on my TR4A. The
finned valve cover does not have a tube extending from it for connecting to
the Crankcase Breather Regulator Valve. My question is will there be any
potential problems if I remove the Crankcase Breather Regulator Valve and
seal up the hole on the inlet manifold?
Thanks,
Jim
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|