Will take a picture in the morning.
Carl
----- Original Message -----
From: "Steve Ball" <banjonut@verizon.net>
To: <triumphs@autox.team.net>
Sent: Monday, September 07, 2009 8:34 PM
Subject: [TR] Dzus fastener holes in bonnet
> Can anyone help me with this one? The guy who is doing bodywork on my '60
> TR3A is now working on the bonnet. He asked me what the holes for the
> Dzus fasters were supposed to look like, and I have no clue. Mine look
> funny and are probably worn, so they might have to be repaired. He needs
> to know what they're supposed to be like.
>
> If anyone has a picture of these holes with no Dzus fasteners installed,
> it would be helpful, otherwise a description would be good. Are they
> supposed to be round holes, or oblong (sort of rectangular like mine are)?
> Is there supposed to be a small "ridge" around the hole (like mine) or is
> the metal just supposed to come right straight up to the hole....mine has
> a ridge around the hole, but that could be caused from wear, or improper
> installation of the Dzus fasteners by a prior owner, bending the metal
> around the hole.
>
> As usual, any info is appreciated, and many thanks in advance!
>
> Steve Ball
> Lompoc Ca
> '60 TR3A TS68164L
>
> email: banjonut@verizon.net
> _______________________________________________
>
> Support Team.Net http://www.team.net/donate.html
>
> This list supported in part by the Vintage Triumph Register
> http://www.vtr.org
>
>
> Triumphs@autox.team.net
> http://autox.team.net/mailman/listinfo/triumphs
>
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|