Would you advise to pin the shaft after the fact if you have one of
the pressed on style (bought supposedly as NOS @ and for sure @ NOS
pricing!)?
Carl
> Check the side clearances too and if necessary replace
> the rotor and pump ring.
If you do replace the rotor though, check to be sure that the new one
is
pinned to the shaft. I've read several reports of replacement rotors
that
were pressed onto a splined shaft, and fail quickly in use.
-- Randall
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|