Thanks to Kent and John for their input. I think I'll give the stuff a try.
Not sure the wife will let me use her new Kenmore oven though. Guess I'll let
the engine heat bake it on.
Earl Bowman
1962 TR4
--- On Wed, 8/26/09, John Mitchell <jmitch@snet.net> wrote:
From: John Mitchell <jmitch@snet.net>
Subject: Re: [TR] Manifold Coatings
To: "Earl Bowman" <earlbowman@yahoo.com>
Cc: triumphs@autox.team.net
Date: Wednesday, August 26, 2009, 4:21 PM
I used their silver high temp powder coat and it's still perfect several
years later. John Mitchell
Earl Bowman wrote:
> Anyone out there had an opportunity to use this DIY ceramic coating on an
> exhaust manifold?
>
http://www.eastwood.com/underhood-engine/exhaust-paints/tlc-cast-iron-ceramic
> -coating-4oz.html If so, were you happy with the results?
> Exhausted Earl
>
>
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|