triumphs
[Top] [All Lists]

Re: [TR] Block wedges

To: <Triumphs@autox.team.net>
Subject: Re: [TR] Block wedges
From: "Randall" <tr3driver@ca.rr.com>
Date: Wed, 19 Aug 2009 07:28:38 -0700
> When I get the new thrust washers and remove the rear main end cap to
> install
> them, I will only be able to
> loosen caps #3 & #2, cap #1 is torqued and is now under the aluminum block
> at
> the front of the engine.
> I hope this is ok and won't harm the crank. Should I be concerned?

No need to loosen any of the caps, IMO.  Just remove the rear cap & let the
others support the crank.

Randall
_______________________________________________

Support Team.Net  http://www.team.net/donate.html

This list supported in part by the Vintage Triumph Register
http://www.vtr.org


Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>