triumphs
[Top] [All Lists]

Re: [TR] cam specs.

To: Gary Nafziger <nafzigerg@yahoo.com>,triumphs@autox.team.net
Subject: Re: [TR] cam specs.
From: Tony Drews <tony@tonydrews.com>
Date: Mon, 17 Aug 2009 22:56:38 -0500
What kind of Triumph is this for?

Here's a page that may help - guessing based on other cams listed 
with the same duration, you'll be at the edge of streetable - I think 
the phrase used is "marginal for street use".

http://www.tildentechnologies.com/Technical/TriumphCams.html

- Tony Drews

At 09:41 PM 8/17/2009, Gary Nafziger wrote:
>I'm still working on fine tuning a new engine overhaul.
>
>It would be helpful
>for me to get some "real life" feedback from people who have more knowledge
>and experience than me in the area of up-rated cams.
>
>I have an S2 which has
>lift of .405"............duration of 282 degrees and power band of 3500-6000.
>How would you rate this cam on a scale of 1-10 with 1 being stock
>..............and 10 being full race with no idle or street driveability?
>I'm a newbie in the area of mechanical ability and experience and need more of
>a frame of referance to be able to judge when I reach the limit...........or
>the place I should be happy with tuning wise.
>
>thanks in advance
>
>gary n
>_______________________________________________
>
>Support Team.Net  http://www.team.net/donate.html
>
>This list supported in part by the Vintage Triumph Register
>http://www.vtr.org
>
>
>Triumphs@autox.team.net
>http://autox.team.net/mailman/listinfo/triumphs
>
>
>http://www.team.net/archive
_______________________________________________

Support Team.Net  http://www.team.net/donate.html

This list supported in part by the Vintage Triumph Register
http://www.vtr.org


Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>