> Is there any type of check valve that is supposed to be in the banjo
> fitting
> on the TR3A gas tank vent pipe? Or is there supposed to be something
> inside
> the tank to prevent gas from pouring out on corners?
To the best of my knowledge, no.
> Anyone else have this problem and come up with a
> cure?
My solution was to simply cap off the vent line (or you could remove it and
put a short plain bolt and washer in the hole). My car had a small vent
hole in the fuel cap (through the inner plate that actually covers the
opening to the tank); but if not, it would be easy enough to add one.
Randall
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|