You're probably referring to Art Lipp's DELRIN bushings
(http://tr6.danielsonfamily.org/SteeringColumn.htm) I think he gets about
$20 for them and it's a simple "press in" fit once you get everything apart.
No need to even remove the old bushings.
Bob Danielson
1975 TR6 CF38503U
Running w/ Throttle Body Injection
Toyota 5 Speed & Nissan LSD
http://tr6.danielsonfamily.org
-----Original Message-----
From: triumphs-bounces@autox.team.net
[mailto:triumphs-bounces@autox.team.net] On Behalf Of Greg Gelhar
Sent: Monday, August 10, 2009 9:05 AM
To: triumphs@autox.team.net
Subject: [TR] TR6 Steering wheel shaft bushings
TR experts,
My 1973 TR6 steering wheel has some up and down motion. I have read here
that there is a press in bushing option that has worked for others.
Does anyone have the demensions to make these bushings? I have the equipment
and the material and am in need of a project.
Greg Gelhar
1973 TR6
1980 TR8
Osseo, MN
.
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|