> I don't see anything. The rod cap was torqued properly with bearings in
> place, the valves all look fine. Push rods look straight and true. No
> scarring or marking of any kind in the cylinder. No marks on the piston
> head.
I think this was mentioned before ... did you check first for an exhaust
leak at #2? That can sometimes produce a "bang bang bang" each time the
cylinder fires.
-- Randall
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|