> I was wondering what and how much
> lubrication should I put on the pilot bearing for the transmission input
> shaft? The bushing looks to be bronze and I wonder if it needs any
> lubrication at all?
The book says it is Oilite, so should not need any further lubrication. I
use a little dry moly anyway, which at least doesn't seem to hurt anything.
Randall
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|