As I thought - cwap - have two sets of bonnet hinges. (one set is still in
packaging so I know it is a bonnet)
one more thing to add to the 'buy it' list
Thanks
--------------------------------------------------------------------------------
Carl - Tampa
1961 TR3A TS81802LO
Body Off Restoration
Completion Date: NATC 2010
----- Original Message -----
From: "Bob" <yellowtr@adelphia.net>
To: <triumphs@autox.team.net>; "Carl TR" <cfmtr3a@verizon.net>
Sent: Saturday, August 01, 2009 7:58 AM
Subject: Re: [TR] Quandry - TR3 hinges
> On Saturday 01 August 2009 07:11:52 am Carl TR wrote:
>> Are the hood & trunk hinges the same of different? I have two sets that
>> appear to be the same but the parts manual lists them as different. What
>> is the difference - maybe they are so close that the ones I have are
>> actually different.
>>
>> C
> Carl,
>
>
> They are different. I believe the bonnet hinges are a bit longer if I
> remember.
>
> Also each set have a right and left. They must be installed on their
> correct
> sides or the bonnet or boot will not open. They will bind.
>
> Bob
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|