Started preping my car for the Dayton BCD and the rear carb has always
lost the damper oil. So I took it apart. This is not the first time I have
taken this carb apart to get to that little O-ring. Well going thru my
parts, I couldn't find a replacement for it. So I went to the several spare
carbs I have, open one of them up to look at the O-ring. What I found
surprised me. The O-rings in the old carbs were square, but the replacement
in
the carb on my car was round (the profile of the o-ring). All the companies
list this o-ring, but I am curious as the proper application. The orginal
part number is listed as: RTC165. Any bodies toughts would be helpful.
Harry Mague
74TR6
**************An Excellent Credit Score is 750. See Yours in Just 2 Easy
Steps!
(http://pr.atwola.com/promoclk/100126575x1222377107x1201454434/aol?redir=http://www.freecreditreport.com/pm/default.aspx?sc=668072&hmpgID=62&bcd=Jul
yExcfooterNO62)
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|