> I take it that means
> the oil seals must be replaced?
Something else to watch for, David, is the condition of the surfaces that
rotate against the seals. If there is a groove or other damage, even new
seals may not hold oil for long. If the damage is slight, you may be able
to polish it out, but otherwise a Speedi-Sleeve or a different flange may be
necessary.
http://www.skf.com/portal/skf/home/products?contentId=242195
-- Randall
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|