My frame-off TR4A restoration has reached the point of final assembly,
the paint is done and now all the trim and interior have to go back in.
I've taken pictures of many well-restored cars at car shows so between
those and the manuals, I have a good idea how most of this goes back
together. (My car was mostly in pieces when I got it). However, I'm
stumped at the speedometer cable routing. I've got some pictures that
appear to show the cable following the tachometer cable routing into the
firewall, but how does the cable get from the overdrive fitting on the
tranny to the other side of the engine? I see there is reference to a
"frame clip" and another clip in the parts manual. Any information on
these clamps and their location would also be appreciated as well as
pictures.
Thanks, Ben....
--
Ben Zwissler
bjzwissler@gmail.com
Columbus, IN
1966 Triumph TR4A
1973 MG Midget
1980 Triumph TR8
2007 Mazda RX8
2002 Yamaha FZ1
2003 Honda ST1300
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|