When I had my windshield redone back in 1972, it had a tape that looked and
felt and acted a whole lot like black electrical tape. Before the Valley
Forge VTR I had redone the 3 and from British Victoria gotten some glazing
tape that was much thicker than the TRF product that I used the second time,
you might try them - or try Moss's. There was (at least at that time) some
variation in thickness and I suppose they are returnable.
Hope this helps
Tom
----- Original Message -----
From: "dorpaul" <dorpaul@bellsouth.net>
To: "list Triumph" <triumphs@autox.team.net>
Sent: Friday, June 12, 2009 7:20 AM
Subject: [TR] skinny windshield?
>I went by the Auto Glass Co. and the guy gave me enuf glazing strip to do
>my
> windshield- but it maybe for 1/4" thick glass (my windshield came from
> www.prosourceglassintl.com and is tinted but is only 3/16" thick). It's a
> 'loose-snug' fit (something that rain will seep through). So I'm
> searching
> for something less than 1/16" thick to make it a 'tight fit'. Maybe a
> film or
> tape that's 1/32" thick- (my calculus didn't cover fractional/decimal
> conversion). Any ideas?
>
> Thanks, Paul 60 TR3
> _______________________________________________
>
> Support Team.Net http://www.team.net/donate.html
>
> This list supported in part by the Vintage Triumph Register
> http://www.vtr.org
>
>
> Triumphs@autox.team.net
> http://autox.team.net/mailman/listinfo/triumphs
>
> You are subscribed as tfansher@comcast.net
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|