Ted Schumacher and his wife have just spent two days of their vacation with us
in the UK - and while
they were here, I saw that braided line. Usual NFI caveat and I'm not on
commission - but the line
sure looks ideal for the purpose. I'd buy one from Ted if I needed it.
Jonmac
----- Original Message -----
From: "John Mitchell" <jmitch@snet.net>
To: "sujit roy" <triumphstag@gmail.com>
Cc: "Triumphs" <triumphs@autox.team.net>
Sent: Wednesday, June 10, 2009 5:16 PM
Subject: Re: [TR] Adding oil pressure gauge
> Try Ted Schumacher at TSI. I bought a braided stainless oil pressure line
>from him for my TR6.
> John Mitchell
>
> sujit roy wrote:
>> I'm adding an oil pressure gauge to the Stag. I'd like to know what material
>> of flex pipe I should use as the pipe will run very close to the exhaust
>> manifold. The oil pressure on the stag does not run much above 50-60 PSI
>> Someone mentioned to use a steel tube to a point away from the manifold and
>> then branch off using flex pipe.
>> Any suggestions welcome.
>>
>>
>> Thanks, Sujit
> _______________________________________________
>
> Support Team.Net http://www.team.net/donate.html
>
> This list supported in part by the Vintage Triumph Register
> http://www.vtr.org
>
>
> Triumphs@autox.team.net
> http://autox.team.net/mailman/listinfo/triumphs
>
> You are subscribed as standardtriumph@btinternet.com
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|