Hello Listers:
Asking about a lube for nylon "bearings" that will not harden and
crud up the works. Reassembling the foot throttle cross shaft on my
TR2 and wanted something to put around the nylon button bearing at
each end of the shaft that would keep things moving smoothly with a
bit of lubrication. Realize that nylon bearings are not supposed to
need too much goop, but thought a little wouldn't hurt.
Thanks for any help you can provide.
Angelo Graham
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|