triumphs
[Top] [All Lists]

[TR] Windshield Job

To: "Randall" <tr3driver@ca.rr.com>, "list Triumph" <triumphs@autox.team.net>
Subject: [TR] Windshield Job
From: "dorpaul" <dorpaul@bellsouth.net>
Date: Mon, 1 Jun 2009 15:31:35 -0400
Thanks Randall,  to everyone,
Is there anything else that I should know (or order) before I take my old 
w/s to a classic car W/S shop  (I think I want this done professionally, 
isn't this a good idea?).  Also, any special instructions that I should give 
to the Professional?

Although it's not original, I'm replacing the cracked glass with a new 
tinted version that's only 1/4" thick- Is this the thickness of the 
original?  It's FYG Brand, made in China but was ordered from 
www.prosourceglassintl.com.


Thanks, Paul  60 TR3a

--- Original Message ----- 
From: "Randall" <tr3driver@ca.rr.com>
To: "'list Triumph'" <triumphs@autox.team.net>
Sent: Monday, June 01, 2009 1:10 PM
Subject: Re: [TR] w/s corner brackets


>> Are the 2 corner brackets (Moss shows them as
>> #802-675) within the w/s frame?
>
> Yup, they hide inside the frame; you won't see them until you start to 
> take
> it apart.  The screw heads can be seen through the slots in the bottom and
> sides of the frame; there are clearance holes so the screws can be 
> removed.
>
> Randall
> _______________________________________________
>
> Support Team.Net  http://www.team.net/donate.html
>
> This list supported in part by the Vintage Triumph Register
> http://www.vtr.org
>
>
> Triumphs@autox.team.net
> http://autox.team.net/mailman/listinfo/triumphs
>
> You are subscribed as dorpaul@bellsouth.net
>
> http://www.team.net/archive 
_______________________________________________

Support Team.Net  http://www.team.net/donate.html

This list supported in part by the Vintage Triumph Register
http://www.vtr.org


Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>